Product Parameters

Detailed Description and Production Benefits

A 16mm feeder is a critical mechanical interface between component reels and the mounting head. When indexing is inconsistent, even a capable placement machine can lose output through pick errors, cover-tape breaks, skipped pockets, or unstable component presentation. This Juki 16mm Feeder is designed for electronics manufacturers that require dependable delivery of larger packaged components in continuous, high-CPH production.

The unit supports 16mm embossed plastic and paper carrier tapes, with adjustable 4mm, 8mm, 12mm, and 16mm feeding pitches. This range makes it suitable for common production materials such as SOP and QFP packages, inductors, electrolytic capacitors, connectors, and medium-to-large IC devices. It is compatible with a broad range of JUKI platforms, including legacy KE series equipment and FX high-speed pick-and-place machines. For factories operating mixed JUKI lines, this compatibility helps simplify feeder allocation and maintenance planning.

Core Advantages for Stable SMT Output

• Smooth 16mm tape indexing: The ratchet indexing mechanism advances carrier tape consistently at the selected pitch, supporting reliable pocket positioning at the pick station.
• Controlled peel-back performance: Stable peel-back tension helps prevent cover tape snapping, excessive drag, and component jumping during feeder operation.
• High-rigidity mechanical structure: The wear-resistant alloy steel frame is built to maintain mechanical stability during repeated production cycles.
• High-CPH mounting support: Accurate tape presentation and pick-up alignment assist the machine in maintaining stable placement performance at production speed.
• Easy offline calibration: The Juki Feeder Jig interface supports standard optical jig calibration, allowing technicians to check alignment before the feeder is loaded onto the line.
• Plug-and-play preparation: Each available calibrated feeder is checked before dispatch, reducing the time required for installation and initial production verification.

Compatibility for JUKI KE and FX Production Lines

This Juki SMT Feeder is specified for KE-710 through KE-760 machines, KE-2010, KE-2020, KE-2050, KE-2060, KE-2070, and KE-2080 platforms, as well as FX-1, FX-1R, FX-2, and FX-3 models. It can therefore serve as a practical replacement or expansion feeder for users maintaining established JUKI production cells. Buyers sourcing a Juki KE2050 Feeder or Juki KE2060 Feeder can verify the machine model, tape specification, and required pitch with our team before purchase.

For JUKI FX users, feeder condition is particularly important because repeated high-speed operation can reveal wear in moving parts, indexing systems, and cover-tape handling areas. The available Juki FX Feeder option is intended for customers who need a mechanically sound feeder that has been calibrated for feeding pitch precision, spring tension, and pick-up center alignment. This inspection process focuses on the operating points that directly affect component delivery rather than relying on a visual condition check alone.

Optical Jig Calibration and Quality Control

Every feeder supplied in calibrated condition is tested on a JUKI optical calibration jig before shipment. The process verifies the feeder’s mechanical position and supports accurate alignment between the tape pocket and the machine pick-up point. Proper calibration is especially valuable when mounting larger or higher-value parts, where a small positional deviation can contribute to pick failures, nozzle contact issues, or placement interruptions.

1. Confirm the selected feeding pitch: 4mm, 8mm, 12mm, or 16mm.
2. Check indexing movement for consistent tape advance.
3. Test mechanical spring tension and peel-back behavior.
4. Calibrate pick-up center alignment using a JUKI optical feeder jig.
5. Perform a pre-shipment running test and prepare test video support upon request.

This procedure provides procurement teams and maintenance engineers with a clearer basis for evaluating feeder readiness. A feeder test report and running video can be requested before dispatch, helping overseas buyers confirm the configuration and condition required for their line. This is particularly useful for replacement purchases made to restore capacity during unplanned feeder failure or scheduled maintenance.

Built for Maintenance Teams, EMS Providers, and OEM Factories

The feeder is suitable for OEM electronics manufacturers, EMS providers, contract assemblers, and independent SMT maintenance companies. It supports teams that need dependable component feeding for daily PCB assembly, prototype-to-volume production transitions, or feeder fleet replenishment. Purchasing a verified Juki Tape Feeder can help reduce troubleshooting time when the original issue is related to unstable tape movement, inconsistent component presentation, or inaccurate feeder alignment.

China Extension Company has specialized in SMT machines and SMT Juki Spare Parts since 2009. We have supported more than 200 SMT line projects across Europe, South America, and Asia, supplying equipment and replacement components to electronics manufacturing factories. Our inventory includes over 2,100 types of original new spare parts for JUKI, FUJI, Panasonic, ASM, Yamaha, and Hanwha equipment, including feeders, nozzles, placement heads, controllers, servo units, cables, filters, belts, and feeder storage solutions.

Fast Dispatch for Production-Critical Requirements

For in-stock items, we can arrange dispatch within 24 hours through DHL, FedEx, or UPS. Stock status should be confirmed before payment, particularly for customers requiring specific condition, pitch setup, or quantity. Our team can also assist with part verification based on machine model, feeder photos, and production tape details to help avoid compatibility errors.

Request Stock and Technical Confirmation

Contact us for real-time availability, feeder calibration records, pre-shipment test video, and volume discount pricing. Please provide your JUKI machine model, required quantity, component tape type, and feeding pitch requirement. Our technical sales team will confirm the appropriate feeder configuration and provide a practical quotation for your SMT production requirement.