Product Parameters

Detailed Product Description

The 2UGKHC000122 Fuji H08 Head is an original 8-nozzle rotary working head developed for production environments that require stable placement quality across both fine-pitch chip work and small-to-medium IC mounting. Available as the H08 or H08M configuration, this Fuji Placement Head supports FUJI NXT and AIMEX platforms used in high-mix and volume SMT manufacturing. It is a practical replacement for factories seeking to restore head performance, reduce recovery time after a fault, or keep a verified spare head ready for planned maintenance.

Unlike a single-purpose head, the Fuji H08M Head provides a balanced mounting profile. Its eight nozzles allow the machine to handle common passive components such as 0402, 0603, and 1005 packages while retaining the flexibility needed for SOP, SOJ, PLCC, BGA, CSP, capacitors, power inductors, and ICs up to 12 mm × 12 mm. With component height handling up to 6.5 mm, the head is suited to many everyday board assemblies where placement stability and throughput must be maintained together.

Core Advantages and Performance Highlights

• Eight-nozzle versatility: The Fuji 8 Nozzle Head is designed for balanced chip and IC production, helping manufacturers cover a broad component mix without changing to a less suitable head configuration.
• Independent servo control: High-response Z-axis and θ-axis servo drives support controlled component pickup, orientation, and placement movement.
• Dynamic optical alignment: On-the-fly vision alignment supports accurate position correction during placement operations.
• Micro-vacuum monitoring: Real-time vacuum sensor detection helps identify pickup irregularities and reduce the risk of component tossing.
• Fast modular replacement: The quick-swap latch mechanism enables rapid head replacement without re-teaching, supporting faster machine recovery during maintenance.
• Verified precision: Every refurbished unit is Grade A+ and 100% CPK tested; original new units are strictly inspected before release.

Compatible FUJI Platforms

This Fuji NXT H08 Head is suitable for FUJI NXT I, NXT II, NXT III, and NXT IIIc systems, including M3, M6, M3S, and M6S modules. It is also compatible with the AIMEX, AIMEX II, and AIMEX III series. Before ordering, buyers should confirm the machine model, installed module, and current head reference with their maintenance team. Supplying the part number 2UGKHC000122 and machine serial information helps us verify the appropriate configuration before dispatch.

Strict Calibration and Vacuum Testing Protocol

A placement head should not be evaluated only by appearance. For that reason, each Grade A+ refurbished Fuji Working Head is inspected and calibrated on dedicated Fuji head testing fixtures. The process focuses on the functions that directly affect pickup consistency, component retention, rotation accuracy, and repeatable mounting performance. New heads are also checked for condition, identification, and shipment readiness.

1. Vacuum holding and pressure test: verifies vacuum performance across the nozzle positions and checks for conditions that may affect component pickup or holding.
2. Z-axis and θ-axis movement test: confirms responsive movement and repeatability of the vertical and rotational axes.
3. CPK precision calibration: evaluates placement-related precision under the dedicated test process. A CPK calibration report is available on request.
4. Pre-shipment running inspection: confirms functional operation before packing. A running test video can be provided for buyer review before shipment.

This verification approach is especially valuable for contract manufacturers and in-house SMT lines where an untested replacement head can create more downtime than it solves. A tested SMT Placement Head gives maintenance teams clearer evidence of working condition before installation, while procurement teams receive documentation support for internal approval and incoming inspection.

Condition Options and Transit Protection

Choose 100% original brand-new stock in box when your purchasing policy requires unused manufacturer parts. For cost-controlled maintenance programs, we also offer fully refurbished original used heads in Grade A+ condition. Refurbished heads are calibrated and CPK tested rather than supplied as unverified used inventory. Condition availability can change by stock level, so real-time confirmation is recommended before placing an order.

Each head is packed in a dedicated heavy-duty aluminum flight case. The custom high-density EVA foam insert supports the unit during international transportation and helps protect sensitive head mechanisms from impact. This packaging is appropriate for warehouse stocking, emergency line support, and worldwide express shipments.

Fast Dispatch and SMT Supply Capability

China Extension Company has specialized in SMT machines and spare parts since 2009. With 17 years of industry experience, we have supported more than 200 SMT production lines across Europe, South America, and Asia. Our inventory includes over 2,100 ready-stock original new spare part types for FUJI, Panasonic, ASM, Yamaha, JUKI, and Hanwha, helping factories respond quickly when a critical line part is required.

For available stock, worldwide dispatch can normally be arranged within 24–48 hours through DHL, FedEx, or UPS. Alongside placing heads, our supply range includes feeders, nozzles, servo drives, controllers, CPU boxes, power supplies, cables, ball screws, filters, belts, and feeder storage solutions. This gives buyers one sourcing contact for urgent replacement parts and broader SMT line support.

Request Inventory and Test Evidence

Contact us with your required quantity, machine model, and part number 2UGKHC000122 to check live inventory and receive a quotation. We can provide available CPK calibration reports, vacuum and movement test details, condition confirmation, packing photos, and pre-shipment running videos for the selected Fuji H08 Head or Fuji H08M Head.