Product Parameters

Detailed Product Description

This original used Fuji H24G Head is a 24-station rotary solution for manufacturers operating high-volume FUJI modular pick-and-place platforms. It is designed for continuous placement of miniature passive components and compact semiconductor packages where cycle time, pick stability and repeatable positioning directly affect line output. Each unit is cleaned, refurbished and calibrated before release, providing a practical replacement option for factories that need to restore production capacity without waiting for a new head supply cycle.

24-Nozzle Throughput for High-Density SMT Production

The Fuji NXT H24G uses a rotary turret architecture with 24 nozzle stations to support fast, continuous pick-and-place operation. During normal production, the head combines high-speed motion with dynamic optical alignment so components can be checked while the placement process continues. This operating method is particularly valuable on boards with large quantities of chip resistors, capacitors, diodes and compact SOT devices, where small performance losses at the head level can quickly reduce total line efficiency.

• 24 nozzle stations support high-speed component handling within a compact module footprint.
• Designed for ultra-high-speed placement up to 35,000–37,500 CPH per module under standard test conditions.
• On-the-fly optical vision alignment helps maintain stable placement during continuous production.
• Independent high-response Z-axis and θ-axis servo drives support controlled pickup and rotation.
• Real-time micro-vacuum sensing identifies pickup irregularities and helps reduce component tossing.

Micro-Component Capability Where Accuracy Matters

For electronics manufacturers producing consumer devices, communication modules, automotive electronics or compact industrial controls, small-chip performance is often the deciding factor when selecting a replacement head. This Fuji H24G Placing Head is specified for ultra-miniature 0201 (008004 inch) components and also handles 03015, 0402 (01005 inch), 0603 and 1005 packages. Its supported range extends to 5.0 x 5.0 mm small ICs, SOT components and diodes, with component height capability up to 2.0 mm or 3.0 mm according to the applicable process configuration.

The head is compatible with standard Fuji 2.5G and 3.7G nozzle series, as well as high-precision nozzles used for micro-components. This gives maintenance teams flexibility when matching existing nozzle inventories and component programs. The result is a focused solution for lines that require high speed without sacrificing the control needed for fine-pitch, lightweight or easily displaced components.

Grade A+ Original Used Condition and Practical Installation

This Fuji 24 Nozzle Head is supplied in Grade A+ original used condition. It is not shipped as an unchecked dismantled part. Before delivery, the assembly is fully cleaned, refurbished and inspected for mechanical and electrical operating condition. The head’s modular quick-swap latch mechanism supports fast replacement on compatible FUJI equipment, allowing qualified technicians to change the assembly efficiently without re-teaching the head. This is important for plants managing urgent maintenance windows, planned preventive replacement or unexpected head-related downtime.

1. Confirm the machine model and module configuration with our sales team.
2. Verify the existing head type, nozzle requirement and production application.
3. Install the replacement head through the compatible quick-swap mechanism.
4. Review the supplied test evidence before shipment and proceed with normal production verification.

Strict Calibration and Vacuum Testing Protocol

A placing head should be evaluated by measurable operating results, not visual condition alone. Every Fuji NXT Placement Head offered by China Extension is tested on dedicated Fuji head test rigs before shipment. The inspection process focuses on the functions that influence pickup reliability, placement consistency and integration into a running SMT line.

• Vacuum holding and leak test: verifies the vacuum system response and holding performance at the nozzle stations.
• Axis movement repeatability test: checks positioning behavior of the relevant motion axes.
• CPK precision calibration: confirms calibration status through a documented CPK calibration report.
• Pre-shipment running inspection: a test video can be provided so buyers can review the operating condition before dispatch.

This documented inspection approach helps purchasing managers, maintenance engineers and overseas buyers make decisions based on traceable test information. It also reduces the uncertainty commonly associated with used SMT spare parts purchased from unverified sources.

Compatible FUJI Platforms and Typical Use Cases

The Fuji Working Head is suitable for FUJI NXT I, NXT II, NXT III and NXT IIIc systems, including M3, M6, M3S and M6S modules. It is also compatible with AIMEX, AIMEX II and AIMEX III high-speed SMT machine series. Buyers commonly source this H24G assembly to replace a worn or damaged production head, maintain a backup unit for critical lines, or standardize spare-head availability across multi-line factories.

For operations using a Fuji NXT III Head in round-the-clock production, holding a tested spare can be an effective way to shorten recovery time when a head requires service. The 24-nozzle format is especially relevant for high-mix and high-volume lines that place large populations of small passive components. Please confirm your exact machine and module details before ordering to ensure the correct configuration for your equipment.

Fast Dispatch Backed by SMT Parts Experience

China Extension Company has specialized in SMT machines and spare parts since 2009. With 17 years of industry experience, we have supported more than 200 SMT line projects across Europe, South America and Asia. Our inventory includes over 2,100 types of original new spare parts for FUJI, Panasonic, ASM, Yamaha, JUKI and Hanwha, helping factories obtain essential components with less delay.

Available stock can be dispatched worldwide within 24–48 hours by DHL, FedEx or UPS. To protect this SMT High Speed Placement Head during international transportation, every unit is secured in a dedicated shockproof aluminum flight case with custom high-density EVA foam. The packaging is designed to minimize movement and impact exposure from warehouse handling through final delivery.

Request Inventory, Test Evidence and Quotation

Contact us now for real-time stock status, quotation, compatibility confirmation, CPK calibration reports and pre-shipment running videos. Send your FUJI machine model, module type and required head configuration, and our team will help verify the appropriate replacement solution before dispatch.